interrupt service routine
英 [ˌɪntəˈrʌpt ˈsɜːvɪs ruːˈtiːn]
美 [ˌɪntəˈrʌpt ˈsɜːrvɪs ruːˈtiːn]
网络 中断服务程序; 中断服务例程; 中断服务常式; 中断源的服务程序; 程式
双语例句
- This article helps device driver developers test the interrupt service routine as much as possible by simulating the various interrupts.
本文通过模拟各种中断，尽可能地帮助设备驱动程序开发人员测试中断服务例程。 - It also registers an interrupt service routine's address to service interrupts generated when wireless data is sent or received.
它还会注册一个中断服务例程的地址以服务收发无线数据时产生的中断。 - Even the jiffies ( small packets of kernel time for timing interrupts) are not altered and this lets you debug the Interrupt Service Routine.
此时连jiffies（用来对中断进行计时的内核时钟滴答数）都不会改变，这样就可以对ISR进行调试了。 - The orinoco interrupt service routine populates sk_buffs with data received from the WLAN and passes it on to the IP stack via netif_rx.
orinoco中断服务例程用从WLAN接收的数据填充skbuffs，并经由netifrx将它传送到IP栈。 - The kernel thread ( s) will be initialized in the open entry point of the driver, provided request_irq succeeds on successful registration of the interrupt service routine, for instance.
内核线程可以在驱动程序的open函数中进行初始化，例如当中断服务例程成功注册时，就提供成功的requestirq。 - The address of an interrupt service routine.
中断服务程序所在的地址。 - A VAX/ VMS interrupt service routine that is activated by a software interrupt at a fork interrupt priority level ( IPL).
VAX/VMS的一种中断服务子程序，在分叉中断优先级（pl）软件中断激活。 - When an interrupt occurs, the current state of the processor is saved and an interrupt service routine is executed.
当一个中断发生，当前的处理器状态被保存并且中断服务程序开始运行。 - The amount of time between the assertion of an interrupt and the start of the associated interrupt service routine.
在中断发生和相关的中断服务程序运行之间的时间长短。 - Aim Objective: To master the timer T0, T1 of the mode selection and programming methods, to understand the design method of the interrupt service routine, and learn skills in real-time debugging.
实验目的目的：掌握定时器T0、T1的方式选择和编程方法，了解中断服务程序的设计方法，学会实时程序的调试技巧。 - When the interrupt service routine exits control of the processor is returned to whatever part of the software was previously running.
当中断服务程序退出，对处理器的控制权转到先前运行的那个软件上。 - Improvement of Timer Interrupt Service Routine in RTOS
嵌入式实时操作系统中对时钟中断服务程序的改进 - Besides these key problems, there are some questions for example module dependency, type safety, load ISR ( Interrupt Service Routine) and so on that can be considered or not temporarily in the course of operating.
除了这些关键问题，还有一些问题例如模块依赖、类型安全、加载中断等问题可以在运行过程中考虑或者暂时不考虑。 - The data exchange between the background ISR ( Interrupt Service Routine) and the foreground Main Loop is achieved by event flags and data buffers.
后台中断服务程序（IS）和前台主循环之间的数据交换通过事件标志和数据缓冲区来实现。 - At last, in the section of software design, startup code programming, operating system choosing and transplanting, task design, drivers design and interrupt service routine design had been discussed.
最后，在软件设计部分探讨了启动代码编写、操作系统的选择和移植、任务规划和设计、驱动程序设计以及中断服务程序设计。 - The main program and interrupt service routine ( ISR) are realized by using modularized software design method.
软件采用模块化软件设计的方法设计了控制系统主程序、中断服务程序及中断服务子程序。 - According to the hardware scheme of control system, the software realization scheme is given, which includes: the design flow chart of harmonic separating algorithm, the main program and its interrupt service routine.
根据控制系统的硬件设计，确定了软件实现方案，给出了主程序及其中断服务程序、谐波分离算法程序的设计流程图。 - Driver Works are regarded as the developing instrument, WDM device driver is developed based on PCI local bus. Such driver can access the configuration space, physical memory and I/ O port of the PCI device and realize the interrupt service routine.
以DriverWorks为开发工具开发基于PCI局部总线的设备驱动程序，实现了可以访问PCI设备配置空间、物理内存、I/O端口及实现中断服务程序的PCI设备WDM驱动程序。 - The ISR ( interrupt service routine) receives and decides the data from main control module, then execute the preemptive task schedule if the data is commander. And if ECG, will be stored it in buffer which shared by ISR and filtering process.
中断服务程序（ISR）接收主控模块数据，经判断，若该数据为控制命令，将优先执行，若为心电数据则存放在与滤波程序共享的缓冲区中； - Modular construction is adopted in the software system design. It is chiefly composed of main program, interrupt service routine, and several functioning modular subprogram.
软件系统的设计采用模块化结构，主要由主程序、中断服务程序和若干功能模块子程序组成。 - We discuss the software modules of the device, including the main routine and the interrupt service routine.
在硬件设计的基础上，完成了装置各软件模块的设计：包括主程序模块和中断服务子程序模块。 - Interrupt service routine ( ISR) is the most important peripheral accessing method.
中断是主机与外部设备交互的最重要的方法。 - Under the characteristics of system, data collected in interrupt mode, processed by timer and filter in interrupt service routine have innovation.
根据本系统特点在设计中，使用外部中断的方式采集数据，对原始数据平均滤波方法，以及在中断处理中以定时方式进行数据解算，都具备了一定的创新意义。 - Resident and application of Interrupt Service Routine
中断服务程序的驻留与应用 - Then there is a discussion of the architecture of the interrupt service routine designing for the real-time system. A basic scheme which can be followed for the program designing has been supplied.
然后对实时系统的中断服务程序设计的结构进行了探讨，为具体的程序设计提出了可遵循的基本框架。 - Finally, this paper compendiary introduces the designs of hardware interface routine for ARM mic-controller, hardware interface and interrupt service routine for USB communication.
另外本文也简略介绍了ARM微控制器系统硬件接口程序、USB通讯硬件接口和中断服务程序的设计。 - The DSP control software is roughly divided into main program, timer interrupt service routine and AD conversion interrupt service routine.
DSP控制软件主要分主程序、定时器中断服务程序和AD转换中断服务程序。 - Based on the hardware circuit designs and the depth knowledge of three-phase inverter modulation technique, phase lock technology and control technology, the system software is designed, including the main program design, interrupt service routine design and the main control software design.
在逆变器的硬件设计基础上，根据三相逆变器的调制技术、锁相技术和控制技术原理，进行了系统软件设计。主要包括主程序设计、中断程序的设计和主要控制软件设计。 - Software design flow chart of software analyze on main program, initialization procedure, the master program, ADC interrupt service routine, GPIO port inspection procedures and display program, and analyze on reliability of the software.
软件设计采用软件流程图的形式分析了主程序、初始化程序、主控程序、ADC中断服务程序、GPIO口检测程序以及显示程序的编写思路，并对软件的可靠性做了相应的分析。 - Analysis and design of the driving power of the main control program and the interrupt service routine.
分析并设计了驱动电源的主控制程序及中断服务程序。